Dell OptiPlex GX270 PC Desktop "motherboard jumper" Questions

...jumper or take the motherboard battery out. The CMOS jumper looks like this >>>> It is the little piece of plastic next to the motherboard battery, if its there move the jumper to the ...

...jumper (PSWD) on the motherboard. This will also clear all CMOS settings: Open your casing, on your motherboard. find the CMOS password reset jumper (3-pin) on the motherboard; Remove the jumper from ...

...jumper diagram for motherboard i have a dell 160 l i need the jumper diagram for the mother board lay out i nstaled new 80 gig and new xp pro and wont boot up Hi, Check that the hard drive is set to ...

...motherboard, for 3 gold pins in a row, with a "jumper" between two of the pins, say pin 1 (end) and pin 2 (centre). Turn the computer off. Disconnect the AC power. Move the jumper to connect pin 2 ...

...jumper on the motherboard that you can pull off and reset the bios password on it. Once you reset the password make sure to turn the PC off and put the jumper back on. I just looked at a GX240 here ...

...keyboard if not work check keyboard lock swicth or jumper or keyboard type selection jumper on ...

...to unlock computer Need to change password of administrator to unlock computer There on motherboard is a button (or jumper) "BIOS reset". Push it/reconnect jumper and you're back to BIOS

...motherboard near the battery you will find a jumper. Put the jumper to cross the pin number 2 and 3. Turn on your PC. Wait 3 seconds. Remove the power cord from PC. After that, put the jumper at the ...

jumper (on the motherboard) from pins 1&2 to pins 3&4, or something like that. However on my Optiplex 360 I found that the PSWD jumper had only 2 pins. By trial and error I found that removing

the motherboard cannot detect the hard drive/ hard disk yesterday, i'd format the PC, it used the dell motherboard. i took or move out the hard drive from the place to the other PC that used the other