Whirlpool LER6636PW Electric Dryer "works area inside" Questions

Works fine, but there's a horrible smell inside the dryer! Took off the vent hose and checked it, removed the lower back panel and look around inside and saw no dead animal. Where else might something

...AREA LINT GATHERS AROUND PARTS AND STOPS THEM FROM WORKING PROPERLY THERE ARE THERMAL DISCS INSIDE THAT CONTROL THE HEAT ONE COULD BE BAD. I CAN NOT FIND THIS MODEL NUMBER THRU WHIRLPOOL IS THIS THE ...

...works but clothes do not dry. Very little air flow from vent Sounds as if there is something (lint buildup maybe) that is blocking the air flow inside this machine. You need to remove the top and ...

inside a closed area. The heat is contained inside the dryer. No ducting to outside is needed. The moisture is removed from the heated air through a condenser before re-entering the drum. Sorta like a

area & some coil is RED. What is wrong? make sure the vent is clear that runs to the outside of the house. Check the 4" exhaust vent and make sure that it's not blocked. If there's no flow all the

...INSIDE OF THE AREA YOU WERE JUST IN (AROUND THE FLAME TUBE). i EVEN UNSCREWED THE OUTSIDE OF LINT CATCHER TOOK IT OFF (EASY) AND CLEANED IT. I ALSO VACUUMED THE BACK OF DRYER WHERE EXHAUST COMES OUT ...

works but no controls work or lights on the controls. Any ideas ? A tell tale sign of a failed control panel. Irregardless of brand, Dryer usually has a 1-year part and 1-year labor warranty. Pull out

...inside upper Area . The igniter is a ceramic fuse that will click and glow completely Red and ready for the gas to create the flame and heat for you dryer. If you model has a bottom front cover only ...

...button loose on on maytag washing 1060 machine the start button is loose but still works- should i replace What is the model number of your unit? Look inside the door area or the top of the

...inside the control panel area or heater strip area they work when the balance between the circuits is upset and they switch off it is not from over current, burnt wires or dead short but by the ...