...bottom dryer vent kits work on any models Most new models have plates that can be removed so that you can vent to any side except the front. The bottom is considered a side. You need to get to the ...
...bottom.it dries and everything ,but its like it's leaking water The most likely cause is your home vent is clogged and the dryer has little or no air flow. The water is exiting the dryer with the air ...
...bottom. It's likely one of the coils is opening a break in the coil as the coil heats up. This coil will shrink when cool and be able to run again. Replace All coils in kit number 279834. Take care ...
...vent is clear and not "kinked" anywhere). You may try this as well, it's more involved. 1) undo the dryer top by locating the hold down clips on both sides between the top and front panel. using a ...
...vent hose. 2. Remove the screws around the perimeter of the rear panel. Remove the panel and set aside. 3. With the panel removed, the heating circuits are located on the RIGHT-HAND side. The heating ...
...bottom t-stats,like i say you have to pull off at least one of the two wires or both to check for continuity.now you have to clean out the dryer and vent line or it will happen again,go back to the ...
20 questions posted
Usually answered in minutes!
1,123 Questions
940 Questions
790 Questions
215 Questions