located under the top. You will have to remove some screws to get to it. Bypass the fuse and if it works, then replace it. It is only 15 dollars. If all is O.K., then check the heating element. It may
Question about Kenmore Dryers
...15 years owned. Yesterday all was fine, today it will not stay ON when the Start button is pressed it starts running, but when you take your fnger off the button it does not stay on. The dryer light ...
...located behind the control panel backing. Just remove the few screws and you will see it. Just make sure to put it back for any techs that ever come out to service it. You can get a thermal fuse at ...
...15 years old . . . whirlpool dryer serial number MD1912702. Last night it was running, drying a load of laundry. It stopped. Now it will not start. the timer works. The power source works. I pressed ...
fuses and the dryer still does not heat up, then I would suggest calling an electrician as it may be a sign of an electrical fault. When in doubt...Call a professional. Be safe, hope I helped. Kyle Mc
...turn but won't ignite the gas. Located near the lint removal tunnel at the back of the machine, replace it for about $15 and see what happens! Gas dryers only have a few parts that can be the
...sensor (located near the igniter) if found defective. I have a Kelvinator cloths dryer about 15 years old takes to long to dry even smaller loads, gets very hot at back end of dryer it is free of ...
1,106 questions posted
Usually answered in minutes!
1,123 Questions
790 Questions
215 Questions
219 Questions