scanner noise Replace scanner motor? Error 71. this error either means the scanner is broken or there is a problem with the main board on the machine. either way it would need to be repaired
Question about Brother DCP Office Equipment & Supplies
...and copying functions are fine, but for the scanner function, the error message cc4-202-00000008 continued to come out. read this; Getting Error message the MFC 7860DW LAN cannot be found when ...
...error = scanner or power supply error Brother 950/980: On copy or transmit they may produce black pages. Prone to bad scanner (CCD). Brother may provide a replacement CCD at no charge to the original ...
...Error Number: 0x800CCC0D As seen above this is what is says after I try to scan Image to send to and e-mail as an attachment. Scanner Working fine. Its just not sending. What Do I do?? nothing to do ...
...parts apart and now it's machine error AF The flat cable of the scanner wasn't connected properly. Try to straighten the end using your finger nails , then slot in the connector. Try again. Good ...
...error A7-PARAMETER INIT...what should i do...? Did you change the CIS scanner (because of broken glass or stained with ink?) The eeprom parameter is not machting with the scanner type! You cant fix ...
...the black protection on the top of the ph but I still dont' have access to the PH? Thanks for your answer machine error a1 means: scanner open which is an info. You dont have to disassemble the
...error! It indicates that the scanner is open (what you have done to replace the carts or when there is a paperjam). It might be that the ph is clogged (mostly due to generic ink). Run the manual ...
Question about Brother DCP Office Equipment & Supplies
error A7 Mismatch between theCIS type and ROM data Did you change the scanner cover? This happens when a wrong cis type is installed. The rom data has to be set again (this can only be done by service
Question about Brother DCP Office Equipment & Supplies
...scanner cover and remove any foreign obstacles inside the machine. If the error message continues, disconnect the machine from the power source for several minutes then reconnect it. ...
507 questions posted
Usually answered in minutes!
374 Questions
395 Questions
242 Questions
245 Questions
120 Questions