Question about Brother DCP Office Equipment & Supplies
Can I change my printer power cord from a Euro 220 to US 110? I bought my printer in New Zealand and have moved to US. Can simple change the power cord to US? Yes All Printers Run On A DC Adapter. So ...
Question about Brother DCP Office Equipment & Supplies
Need to reset Epson DC135C printer as unable to print Push and hold the power button until the printer powers off. Unplug the printer for several minutes and then plug the pirnter back in. This will ...
Question about Brother DCP Office Equipment & Supplies
...someone suggested flipping a switch "near the scanner bed" but the only switch we can find is the Power source. We've tried powering off/on to reset but no luck. According to Brother there is no ...
...& still get message that it's empty. Need help please. Have you tried Taking out all the cartridges Power down the power Power up the printer Open the scanner Cover Close the scanner cover Message ...
...OK: 7 - (Ok) 6 - (ok) 4 (ok) then start b/w copy to initiate the carts and let the machine do some power cleaning. leave the maintenance mode by pressing AUB 9 (ok) and 9 again. 2. Make sure that
DCP-130C IF PRINTER POWER IS CONNECTED TO PC ON START UP IT WILL NOT LET THE PC LOAD UP ? BUT IF THE POWER IS OFF ON THE PRINTER THEN START UP MY PC ALL IS OK THEN I CONNECT THE PRINTER AND IT WORKS ...
Question about Brother DCP Office Equipment & Supplies
My printer says peper jam, but i see no paper i removed back cover, looked at interior of printer from every possible angle, no paper. power down printer, wait for 30 seconds then power up again.
wont turn on but power source and cable are fine this is most probably the Power supply unit of the printer which is broken. in most cases it's just the main fuse which has burned out.
no power The power supply board has failed, causes, main fuse, bridge diodes, and electrolytic capacitor, are the more common parts to fail. The copier must be dismantled to find the extent of damage ...
How to Power Clean Brother DCP J125 maintenance 76, press 3 (power) or 4 (turbo) . press mono to start.
507 questions posted
Usually answered in minutes!
374 Questions
395 Questions
242 Questions
245 Questions
120 Questions