Whirlpool GHW9100L Front Load Washer "spider arm tub" Questions

...spider arm and the shaft , because it is 10 years limited waranty . But if it is not under waranty it costs about 270$ for that tub you can buy it from many appliance parts web sites on the net. Good ...

...tub, then the spider is broken. The spider is the support arms that hold the wash tub to the drive shaft. It's very expensive to repair. If there is no thumping sound when you turn the drum, it could ...

...spider arm Replacing the spider arm on this machine is one of the most difficult jobs. Just buying the part is extremely expensive because the arm and stainless tub are sold as one. When I tore down ...

...spider holding the inner tub is broken. All 3 arms !!! Because of that, it rubbed on the front upper drum and tore it apart and I now have many holes all around the front door gasket. From what I can ...

...spider arm". The normal play for the inner tub should be smooth, even and firm. If you can get it to move one way more than another one of the arms of the spider may be cracked. It would require ...

...spider arm broken, it may able to wash, but in spin cycle, it makes loud noise and unbalance movement. replace the spider arm. if you are handy, you can use few strong enough pieces of steel iron to ...

...took it apart the spider arm on the tub was corroded and broken this holds the tub straight and it is mounted on spring for vibration. The tub was damaged but repairable and I installed a new tub ...

...then take separate the tub,with all the time and money it would be better to replace the washer,if you look inside at the back of the tub,you'll see like a peace sign,that's where the spider gear

...spider arm on the back of the drum it may be corroded and putting the drum off center at low speed. I just replaced the drum to tub gasket and the spider arm which was severely corroded (name may not ...