...Duet frontloader only washes with hot water. Cold water is turned on and the button for cold is lit. Any help? The cold water control valve may be bad. Switch the hoses to test the control valve. The ...
Question about Whirlpool Washing Machines
change the setting on whirlpool duet washer to make the hot water washes hotter? I have my water heater set to the highest but even on Sanitary wash it adds some very hot water and then quite a bit of
...change complete fitting, dut first need to find out if it is the hot or cold vaulve. assuming it is hot and cold fill.The electric solonoid can be reused, as long as the rest of the vaulve is ...
Question about Whirlpool Washing Machines
...change the cycle settings. Any at home remedies? what light is flashing when it beeps. You might have to check and see if you are getting water to both Hot and Cold on the machine. Or your door might ...
Question about Whirlpool Washing Machines
...go to bed If the washer has water in it next morning it is the hot valve that has gone faulty if it is dry then it is the cold one They are easy to change and can be bought from a number of ...
Question about Whirlpool Washing Machines
...the part cost.??? Thanks for any help you can give me.. Sounds like your cold fill valve is plugged . Remove the cold hose and clean if the water keeps coming after this while off change the
...cold any help would be great i have no heating element my washer is not a duet ht just the regular duet Check and replace - Flowmeter. - Water inlet valve Make sure to unplug power cord before you ...
Question about Whirlpool Washing Machines
Duet clothes washer fills up with water even when the power is off. The water eventually leaks out of the open door. If the door is latched closed, the water will fill up the inside of the washer. The
duet sport ht MOD # WFW8300SW02 My washer will change its settings when I push start... it changes from quick wash with cold water to whitest whites with hot water and an extra rinse... from normal to
...by compressing the refridgerent and then decompressing it through a metered hole or valve in the high pressure line, this change in state from high pressure to low pressure makes the gas very
253 questions posted
Usually answered in minutes!
9,125 Questions
2,624 Questions
2,038 Questions
1,413 Questions
1,373 Questions