frequent out of balance problem model no. ghw9150pw1 All front-load washing machines have shock absorbers that are used to dampen the tub movement in the spin cycle. The shock absorbers or struts are ...
Question about Whirlpool duet Washing Machines
damage shocks How can I tell if they are damage Is the tub unstable or machine jump around more than when new. It is usually not the shocks that break. The shock mounts subjuct are to damage and are ...
Question about Whirlpool duet Washing Machines
ll be buying the front part of the drum too, if you wait to long. probably due to the fact that the shock absorbers are shot. Like in a car, the shocks are meant to absorb vibration. So with excessive
washer not level how do you level the duet washer? unit has four feet, to level, however, the "shock absorbers" with in the unti may have come undone, try removing the lower acess panel( 3 torx 20 ...
Question about Whirlpool duet Washing Machines
how to get to the shocks on a whirlpool duet washer 1) live wires touchign the chassis2) ground defective from the pole bar in ground3) some wires is not having the cover and touching the chassis ...
Whirlpool Duet Washer Problem My washer is about 15 months old and was working fine except for mildew on the bellow. I had a service tech out on Friday who replaced it and then on Saturday when I went
Question about Whirlpool duet Washing Machines
...peices are plastic and there are no screws. How do you remove the old pieces and install a new shock absorber? Hi, When my washer did that, I found that the shocks that hold the tub were bad... ...
Question about Whirlpool duet Washing Machines
..., unscrew the screws holding on the front access panel. When you look inside, you'll notice several shocks (usually 4) that stabilize the drum as it turns and spins. Make sure they are all intact and ...
my washer seems to be off track or something as it wabbles all over t he place... can it be the shocks or t he motor mount?? Hi, When my washer did that, I found that the shocks that hold the tub were
do shocks require replacement I use about 6 layers of silverware drawer or toolbox drawer foam folded up under the feet to prevent too much movement and absorb shock and vibration....
250 questions posted
Usually answered in minutes!
9,125 Questions
187 Questions
64 Questions
34 Questions