Whirlpool LTE5243D Top Load Stacked Washer/Dryer "stuck sensing" Questions

...stuck on Sensing Cycle and not proceed to the Wash cycle, most likely one of these 3 parts malfunction: Failed Water Inlet Valve or Inlet Valve Tap is in OFF position. Shift Actuator not able to ...

Kenmore 25102 stuck in sensing mode Machine stuck on sensing mode

...stuck on sensing all the washer does is say sensing and lid locked and will not was. stays on sensing for hours. tried multiple loads, checked to see if it was level... it still won't work ...

...stuck on load sensing? Keeps weighing the load. Does not start the cycle. No error code. Pull the mains plug for 5 minutes. That is the closest you can get to a reset. Some do it by holding the On ...

...stuck in sensing mode. when I put it on any cycle and click start it begins the cycle and says sensing then it never leaves from sensing mode. I ran diagnostics and went through each cycle and when I ...

stuck on sensing? We replaced the lid lock switch on our maytag top load washer model number mvwc416fw. After replacing the lid lock the washer will fill and agitate for the wash cycle but it will not

...stuck on SENSING and LID LOCK I replaced the Door Lock and Actuator - still getting the same results as I did before I made any replacments Maytag Centennial Washer MVWC400XW3 When putting clothes in ...

dryer stuck on sensing My dryer is stuck on "sensing" status What is the complete model number of the unit?

...there a way to reset my washer? My washer keeps getting stuck on the "sensing" mode or the light will get stuck on spin but the lid unlocks and the load of laundry isn't done. check pump for ...

...stuck in "sensing" mode. Tried to change settings , and can change timer and from reg to do delicate but still in sensing mode. What do I do? have a really good look to see if there is a reset button ...