...agitator to replace the dogs? remove the fabric softner assemble.if ther is a plastic cover remove it remove 1/2 bolt and reach down under agitator up. put agitator on the floor.put a foot on both ...
...replace them, but the agitator will spin both ways if turned by hand. There is a bolt that holds the agitator in. Remove it, pull up on agitator then find the dogs there. When replacing, you have to ...
Remove the coupling and replace it with a new one. Replace the agitator. If the agitator is hard to remove,use a old leather belt under the agitator to pull up on. Watch your nose when it comes loose
...replace the agitator dogs. To replace all you have to do is pop the top cover off of agitator and remove bolt. Pull up on agitator and remove from washer. Next remove upper agitator from lower ...
Question about Kenmore Washing Machines
...machine fills and spins but won't agitate First, the machine would not spin or agitate. I replaced the failed motor coupler, but now the machine does not agitate -- I can't hear the motor ...
...replace your agitator dogs in agitator.very cheap fix and easy repair.pop the top off agitator,you will see 1 bolt inside center of agitator,take out bolt and pull agitator.pull agitator apart and in ...
...replace agitator dogs,they are located in agitator.pop top off and one bolt holds it to tub,remove bolt and remove agitator.pop top part off agitator and you will see little plastic agitator ...
...replace the agitator cogs, aka "dog ears". They allow the agitator to work in a ratcheting motion. I have a different washer but have had to replace mine several times. They are plastic and just wear ...
...i replaced that and still the same?HELP! when you pulled up agitator was the splined shaft moving back and forth ? If so replace the insert in the agitator. If not the problem is in the transmission
1,616 questions posted
Usually answered in minutes!
9,125 Questions
2,624 Questions
2,038 Questions
1,413 Questions
429 Questions