Whirlpool LTE6234D Top Load Stacked Washer/Dryer "idler pulley" Questions

Ad

...idler pulley in the picture is behind the motor. I would check the ilder pulley to see if it rotates freely and does not have any odd side to side movements. If it does then replace the idler pulley ...

Ad

Question about Maytag Washing Machines

1 Answer

...idler pulley come apart and the belt fall off the pulley. I bought an aftermarket belt and a new idler pulley, but after installing, the belt was slipping during agitation as well as at the start of ...

Ad

Question about Whirlpool Washing Machines

1 Answer

idler pulley fits in the slots on the bottom of the cabinet (in front of the motor) with the wheel or glide facing the left side. Place the belt (grooves inward) around the drum. Pull the belt through

Question about Amana Washing Machines

1 Answer

...you are replacing the belt. The small idler pulley can be worked on by running the belt on the big pulley when reinstalling the motor Try not to stretch the spring for the idler pulley, hope this ...

Question about Kenmore Washing Machines

2 Answers

...Idler Pulley laying down on the bottom of the dryer, any reason why this is happening? I cant keep replacing belts like this! A few things to check. Make sure that the idler pulley is turning freely ...

Question about Kenmore Washing Machines

1 Answer

...panel off of the dryer. place the idler pulley in the holes located below the motor pulley put the belt around the drum pull the idler back and the belt loops around the idler and onto the motor ...

Question about Amana Washing Machines

1 Answer

left side of black plastic idler pulley. Work belt around transmission pulley. You can press on opposite end of idler pulley arm to loosen belt tension. Make sure belt is on all pulleys before testing

Question about Maytag Washing Machines

1 Answer

idler"pulley to automatically adjust belt tension,either "idler" is defective or belt is off a pulley somewhere under there,tip washer against a wall with a towel so you dont scratch washer finish and

Question about Whirlpool Washing Machines

1 Answer

idler pulley assembly. The noise you're hearing is most likely a worn out or bound up idler pulley that keeps tension on the drum belt. This belt is turned by the electric motor and causes the drum to

Question about Hotpoint Washing Machines

1 Answer

pulley groves, not on the shaft on the motor. Witht the idler pull back past the motor. Put the belt by the idler and release the idler gently. The idea is to have the tension of the belt on the idler

Not finding what you are looking for?
Whirlpool LTE6234D Top Load Stacked Washer/Dryer Logo

341 questions posted

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...