Question about Maytag Ovens
...the broil burner ( at the top of the oven) have electric igniters . When switching from bake to broil the broiler goes off due to a defective or broken broil igniter. cheap part to replace (
...relays one for the bake and one for the broil and one for the common. This one goes out and the bake and broil will not work. The control is fairly expensive you may want to have a tech check it
Question about Electrolux Ovens
...goes from "bake" to "warm oven " after about 1 hour. I try to use the other oven and it will go start to "warm oven" is the bake element getting hot?when you put the oven on bake both the broil and ...
oven stays in warm up mode The oven doesnt heat up to cook. Its like it is stuck in preheat mode? does broil work? if broil works and bake does not you have a bad bake element. let me know how it goes
broil, it is most likely the TOD thermostat located on the back of the oven. This is the most common failure, especially after using the self clean feature, or if the power goes out during baking. The
Question about Jenn-Air Ovens
...Broil' I see that igniter gots hot red almost instanteniously, gas ignites and heating goes as normal. I would appreciate your advice. Thanks, Alexander. gas oven, call in professional help they want ...
goes to bake element. Checked ''Broil'' post and when slector is on ''Bake'' we have 120V and when on ''Broil'' have 240V??? Are both bad? Called and was told that the selector switch is discontinued.
Question about KitchenAid Ovens
...broil element comes on I stick a piece of foil over the cake until it goes off. Otherwise it will set the top and the cake won't rise as much. Even doing that cakes don't rise as much as they did in ...
...goes into preheat mode, but does not heat. It also doesn't heat up during the normal bake or broil settings. The bake and broil elements do not turn red or heat up. According to the panel everything ...
why won't my oven go on bake If i push the bake button it goes directly to broil.What is wrong? you have a bad clock board a stuck relay on the board. get a new clock board.
380 questions posted
Usually answered in minutes!
282 Questions
135 Questions
112 Questions
108 Questions