Whirlpool RBS275PD Electric Single Oven "changing lock relay" Questions

whirlpool electric oven problem We have what is apparently a frequent problem with whirlpool electric ovens. The oven control panel went blank and door locked during self cleaning, Replaced thermostat

lock and over heat. I turn off the breakers and then reset the breakers and pushed the off button. This changed the display to pv2. The upper element was still on with the door still locked due to the

lock and unlock if its the relay.. it will either keep locking or keep unlocking if its a relay problem... its possible that the circuit board is damaged. check for blown capacitors. if you are unsure

I opened the door before the self cleaning cycle was finished? It was blowing and I thought my husband left it on when he left. I came home and walked past it and felt the air, so I pushed oven off ...

Model SVD48600 door won't open after clean cycle. Fan also locked on. Powered off overnight; no change: "Locked" still displayed That is a very complicated unit for the average handyman. It has ...

...changing resistance. You can easily check the thermostat to see if it is OK, with an Ohmeter across the thermostat, which should read about 475 Ohms at room temperature. If it reads Zero, it is burnt ...

relay which controls the oven is bad, most likely damaged when the bake element shorted out. This would require replacing the clock, which has all the relays mounted to it's electronic board. I'd list

...lock is involved, you may have to wait for an hour or more for the oven to cool off and reset itself. DIAGNOSTIC SHEETS The error codes for your specific model may be listed on a diagnosis sheet ...