Kenmore Elite 22.4 cu. ft. Bottom Freezer Refrigerator with Adjusta Cube Ice Maker "refrigerator ice makers work faster" Questions

...ice maker would not work. It needs to get the air out of the line before the water will fill the tray. When the line is opened up air will get inside and needs to bleed out first. On units with a ...

Ice maker not making ice. How do I know if the infra red sensor is working? I put new filter on box. the infa red sensor should be on constant if the switch on the right is in the on position, if the ...

Ice Maker does not work I have a Kenmore 55471. The ice maker stopped working. I can feel the ice in the metal tray but ice does not drop down. Any solutions? Thanks! My husband repaired our ice maker

...will only work at around 5 degrees . Also , let the ice build up close to the ice maker , as this will put the coldness of the ice , closer to the mold , and it will make ice faster when being used

...ice maker . The switch on the icemaker for normal , runs the icemaker normaly . In the ice plus , a small fan comes on , blowing the inside air , over the ice maker mold , to help it freeze faster

...refrigerator model number 53652/53654/53659 ice maker has quit working. There is still water in the door - no ice. your model# is not correct but you might need a new ice maker unit unless u sure the ...

...ice maker stated to work but I could not get the water to come out of the spiket on the front for drinking water. What coulf this be? Check for a frozen water line. the water line is froze.. I took a ...

Ice maker not working Several days ago I found water on floor at refrigerator. Opened left side of refrig and saw water had come from ice maker. At this point there was ice in the tray, but it was ...

ice. but if that dont work then that box should be equiped to have the more up to date one that has a fan in the ice maker that makes it colder and makes ice faster.. remeber the colder the faster the

...work again faster This ice maker has 2 infrared sensors in it that lead back to the board. Either the sensors are faulty or the board is faulty. The sensors can be bypassed if you want but it will ...