I can't get a dial tone. only a busy signal. DO you have a 2 line model? If so check and make sure the conf (conference) button is not pushed as it will keep the line off-hook forever. Hope this helps
Question about Panasonic Lands Phones
...signal is not strong enough to power multiple units. You should use the hold feature, or turn your volume up, or use the conference feature, but the best solution is to put it on hold if you
Question about NorStar Lands Phones
conference transfer) signal through active calls. Places outside caller on hold and can only reconnect by using feature 71. How can I avoid this? Could be a sticky button that is programmed for F71Do&
conference calls of mail because the phone does not transmit a DTMF signal whe the # sign is pushed YOU DO NOT HAVE A speed dial programmed. If you hit *# then # it will work or have a programmer prog
Question about Vodavi Lands Phones
conference call problems Now this system is very old about 20yrs. I am told the lines are analog, but when connected to varies phones in the office, the signal turns digtal. I'm trying to utilized the
...Conference Telephone do not have a dedicated Hold button. For all other 4600 Series IP Telephones, pressing the Hold button instead of the Mute button also works. The following text displays ...
...is low battery signal on one of the sets. Is that my problem? A guess - Some phones have a conference, room monitor or intercom feature. Make sure all intercom use is off on each handset as
650 questions posted
Usually answered in minutes!
607 Questions
320 Questions
275 Questions
147 Questions
81 Questions