...sound and the power light goes off as if its turning on then the light stays red and nothing happens, i dont have the remote either. Model number is LD3202 Thankyou in advance power supply fault . ...
Question about Polaroid Televison & Video
...10v caps and one 1500uf 10v cap bad. easy one here you have a bad cap in the power board the can like device will have a puffed up top from venting the value is on the side replace it and your all ...
...sound some one said it maybe a fuse but i dont no where to find them plese could you help me and thank you sounds more like a powe supply board problem.... 14 caps need replacing......... common ...
...easy to notice because they will be rounded and puffed on top. Good caps are nice and flat on the top. Remove the board from the set and unsolder the legs of the caps and pull them out of the board. ...
Question about Televison & Video
...sound no picture .i replaced 4 x 1000uF caps in psu that were bulging. now I have faint blue screen.back light is bright im not sure if it is a signal panel fault. the ic gets very hot Sounds like a ...
sound. However, when they get really bad they can prevent the TV from turning on. Please see the link below, posted by stiv0. It gives detailed instructions on how to replace these caps and to tell if
...sound go. What's the typical cause? How easy is it to fix and what parts do I need and where do I find them? Thanks for you help. Ed i suspect bad caps in your tv for the caps and the board i sujest ...
cap just happens, and sometimes its a sign of bigger problems so I tend to replace the board. If you are comfortable you can take the back panel off, find the power supply board and look for caps with
...had solder points all on one side opposite the cap can, so it was easy to do a pro solder job by flux & sticking the legs just barley out of the board surface. I hope this helps somehow. ...
Question about Vizio Televison & Video
...board. Or, the four caps on the inverter boards. I have seen both having your symptoms. A fairly easy fix for a person with basic soldering skills and ten bucks for parts. The bad caps can be ...
117 questions posted
Usually answered in minutes!
391 Questions
300 Questions
256 Questions
225 Questions
178 Questions