...temperature flashing (top bar only on 7 segment display). The set buttons would not change the display either. The refrigerator and freezer both were about the right temperature (41F and -3F). The ...
...temperature flashing (top bar only on 7 segment display). The set buttons would not change the display either. The refrigerator and freezer both were about the right temperature (41F and -3F). The ...
...temperature flashing (top bar only on 7 segment display). The set buttons would not change the display either. The refrigerator and freezer both were about the right temperature (41F and -3F). The ...
display flashing, and the inside of the fridge was warm, however the interior light was still working. i've turned the fridge off for 10mins, and turned it on again. still not fixed. does anybody know
...display will occur if the fridge internal temperature is too high. If the temp seems normal, unplug the fridge for ten minutes and then plug it back in. That will reset it. Here is the owner's
...temperature .. .. if it reads open then its bad .. even without that part i think the compresser will hum for awhile but just wont start .. other things (lights, displays) should work ok even if the ...
...temperature. May also need to check the defrost timer, u can get by and test manually by placing a small screw driver into the tiny slot or hole underneath the timer and turn slowly clockwise till u ...
Temperature Controls ·A Frigidaire refrigerator's display panel blinks when the control panel is touched to set temperature controls. After pressing "Freezer Temp" or "Refrigerator Temp" on the keypad
high humidity warning sign Is illuminated constantly Is this correct?? Also I have yet to witness the operation of the internal fan which I presume circulates the air around the unit , Is this correct
741 questions posted
Usually answered in minutes!
1,894 Questions
803 Questions
487 Questions
348 Questions
283 Questions