...wire, but the pull switch has a black, a red and a blue wire. What wires go together? What you have is a switch for a ceiling fan/light combination. Black wire from your light is power, White is ...
...switch at the top of the unit. You can usually get the lights to at least flash. Take the top grill off and either unplug the unit or shut it off at the breaker. Take off the switch cover, remove the ...
...with you. They will tell you how to install. Simply involves prying the switch out removing the wires reconnecting the wires to the new switch and pressing in. Caution when installing: Machine ...
Question about LG Refrigerators
...switch were OK. I found the led light had no power due to broken wires located in the top right door hinge. There was insufficient wire strain relief insulation and the wires broke with the repeated ...
...is in the light wiring and nothing else. Retrace the wiring and you'll surely find it there. Rewire and have a good
...switch it will have one wire distant from the other 2.... that wire is the power wire "C". You jumper that to the wire that would be attached to the "NO" terminal. After you jumper the wire... and ...
...by depressing the plastic release tab (If you can find them) and then pull it out. Remove the two wires from the switch and mate them as best you can so they make contact and will not ground to ...
...switch has two. Make a jumper for the 2 wires with an insulated wire and momentaily plug the unit in to check for a light. If you have a light the switch is bad. As for the freezer switch it has 3 ...
have any ideas on finding a solution? Thank you. Some appliances have electrical schematics on the back of the fridge, some are hidden behind rear cover. Wire,Switch or fuse..not much else it could be
2,353 questions posted
Usually answered in minutes!
803 Questions
611 Questions
487 Questions
348 Questions
283 Questions
