Whirlpool GD2SHGX Refrigerator "remove control panel ice dispenser" Questions

...control panel The electronic touch screen control panel for the ice/water dispenser on the freezer door recently shut off. Total blackout. No lights, no response to touch, and of course no water or ...

...control panel and soldering some of the connections on the slide switch together so that we now have no crushed ice function, but the ice cubes work again. You can also replace the circuit board in ...

...remove the control bracket.10. Remove the 1/4. hex head screw to remove the water fitting (fill spout) from the water dispenser lever.11. Unsnap the ice guide and remove it from the ice dispenser ...

...control panel pull up and out it is hard and you think you are going to break something but you are not when you get the control panel off there will be 4 screws at each corner undo them and slide ...

...control panel On the control panel we are not able to switch from ice to water...changed the control panel, still not working...all the other lights are working well. Tried to reset door lock button, ...

...any effect when the cup is removed. I had to unplug the control panel at the top of the fridge to stop it. What part should I troubleshoot? the door cup activator push bar [switch] sticking or ...

...remove this panel because having it on helps the air push into fridge compartment and keeps cooling elements from turning to a block of ice, " so long story short " its either your cooling fan or ...

...advise. HI there is a solenoid behind the the little control panel there that is bad or rusted, The part is $30-50.00, You will need to remove the control panel on the freezer door to change it. ...

...panel! Ice dispenser doesn't work Dispenser control board If the ice dispenser is not functioning at all the most likely cause is going to be the dispenser control board. The dispenser control board ...

...remove control panel from front of fridge? I just figured this out. You have to insert a flat blade and pry down and out to release 4 clips along the top of the panel. Work across the top from one ...