Janome 1017 Mechanical Sewing Machine "rotary plate" Questions

...is E-6354. Where can i finf a manual fir this machine? The plate number underneath in front is 127-69171. Donna Anderson ...

...plate out and you will see a black rectangular metal bar in front of the rotary hook mechanism - there is a small silver part in the middle that fits in a slot in the rotary hook bobbin basket - the ...

...the feed dogs on my elna carina sewing maching The Carina came with a metal plate that you clip over the feed dogs onto the metal plate (rotary hook cover), they don't have the feed dog drop

...plate, sewing foot and bobbin, and hand wind the flywheel through a stitch sequence and watch the needle and rotary hook movements. When the needle is at its lowest point, the rotary hook should be ...

...with the thread on top it goes under the bobbin case and it tangles? There is a plate called "rotary hook plate" and has to be put on the exact place so the bobbin can be able to turn no more than 2 ...

...rotary hook rotating and catching the thread is not occuring. You could remove the needle plate and manually go through stitch sequence by turning flywheel towards you and watch the rotary hook and ...

rotary hook now goes around in continuous one direction or the other so cannot put a needle in and it seems to rub plate as it goes around. the feed dogs still go up and down. What happened??? It this

...plate for a better view of the feed dog movement and the rotary hook. I suspect you will find either the feed dogs are not raising high enough or not moving at all. Comment for further

...around the Needle Plate" in the User Guide or "Cleaning of Knives and Rotary Hook" on page 316 (or 6-6) in the Service Manual located at

...rotary hook. If this is a star series TSP you may be able to remove the cover plate on the free arm area and view the shaft and gear in this area. Its just held down with a single screw near the ...