Janome 1017 Mechanical Sewing Machine "presser foot sticking" Questions

...presser foot why is the Zipper presser foot not sticking Is it fitted correctly?  Some of these feet need to be helped a little to get them to snap into place.  (press down on the presser ...

...presser foot pressure is not adjustable on the 900 Nova and is not necessary with any Bernina models from the 117L through the 1630 series. If the presser foot bar is sticking so that it is sluggish ...

presser foot you are using--there are several. If it is the invisible zipper foot, there is a groove in the bottom of the presser foot that straddles one strip of zipper teeth which positions it close

...presser foot is sticking to the fabric, causing drag--may need to use a teflon foot that will slide easier than metal. In a pinch, you can also place thin material like pattern tissue paper between ...

...presser foot pressure setting on your machine. If it is set too heavy, it will prevent thick fabric from feeding through easily but instead will push the fabric in front of the foot. It could also be ...

how do i raise the presser foot? it should be a silver lever on the back side on the left of the machine. it sticks out so it pretty easy to see,,it's called the presser foot lever

...presser foot pressure adjustment that increases the pressure the presser foot applies to the feed dogs. The feed dogs could be worn (never run the sewing machine without fabric between the presser ...

...presser foot that is narrow on the right side, you won't need a 1/4" foot. Use an accurate ruler, put it under the presser foot and gently lower the needle until the needle point rests just to the ...

...presser foot. However, once I place the fabric in place the fabric does not move. Is this because it needs more oil or something else that I can do? Or is this something that requires professional ...

...presser foot pressure adjustment Is there a way to adjust the presser foot pressure on a Bernini 1008? Can you describe problem [email protected] No adjustment is necessary on any of the Bernina 1000 ...