...remove the drum from a Hotpoint WM64 washing machine? I need to change the bearings. Remove top cover and rear panel. Remove belt and drum drive pulley.Remove clamp that secures door seal Remove top ...
...drum, remove heater/other connections, remove door gasket from front, support drum from top, remove springs, lower drum, dismantle drum in two pieces, remove inner steel drum. well rest i think you ...
remove drum pully, refit pully bolt and drift inner drum out having put nut back on drum spider thread to avoid flaring shaft, using hammer knock shaft through bearings, then using a chisel or similer
Question about Samsung Washing Machines
...remove the drum. You can buy cleaning agents for the washing machine at the local supermarket. You have to actually run the machine in cleaner solution and you have to do this every 3 months at
Question about Washing Machines
...drum to remove something that is stuck between the 2 drums. how do I do that? depends on what kind of washer you have? and no buttons but yes most use a tool called a spanner wrench to remove one big ...
Question about Washing Machines
...remove the inner drum on my Defy Laundromaid 1300m? I have removed the top, but on all other youtube videos of drum removals there are 6-8 10mm bolts which releases the inner drum from the outer ...
...drum - remove the agitator, pull off the sofetener cup and remove the 15mm bolt down inside to remove agitator, then secure inner drum to center bearing. If you mean the outer drum, check the holding ...
Question about Washing Machines
...remove the drum from a Hotpoint Aquarius WML 560 P How do i remove the drum assy. Hi, There is not much you can do to remove the drum of your WML 560 P Washing Machine...you can remove the bearings ...
drum remove the fixings around the drum with a t-30/t-40 bit,then split the drum now comes the tricky bit - AT THE BACK OF THE DRUM IS A 13MM BOLT UNDO THIS ONE TAKE OFF THE FLY WHEEL AND THEN REPLACE
drum remove the fixings around the drum with a t-30/t-40 bit,then split the drum now comes the tricky bit - AT THE BACK OF THE DRUM IS A 13MM BOLT UNDO THIS ONE TAKE OFF THE FLY WHEEL AND THEN REPLACE
173 questions posted
Usually answered in minutes!
44 Questions
40 Questions
24 Questions
26 Questions
