Gemini PT-1000 II Turntable "direct drive starts stops" Questions

...**** Smith Electronics for under 30 dollars if they are direct drive then you could check the fuses if its not either of these you might have to replace the motors which is quite inexpensive ...

direct drive spinning to fast one of the turntables is spinning to fast and i cant seem to change the speed or stop and start it without having to switch the power off and on. can someone please help ...

...direct drive turntables is spinning to fast and cant seem to change the speed or stop and start it without having to power off and on, can someone please help! Also is there anywhere i might be able ...

...direct drive turntable? The product is Technics Direct Drive Turntable SL-D202. I bought this from a local charity shop for around 20 and it was a good buy and it works brilliantly! Until, I started ...

Direct Drive turntable. It can have a lower supply issue, microprocessor(computer inside your technics) or the drive circuitry. This will not be easy to resolve, and will require professional service.

...Direct Drive there's no belt to fall off. There is an electronic brake. Could your problem have something to do with the Reverse function? Check the L.E.D. Perhaps cycling it will help. USING THE ...

direct drive turntables, and more than likely one of the ICs shorted. Unusual that both shorted out at the same time, so the only thing I could suspect is a faulty power source - make sure all of your

...would be a part overheating the longer the deck is left on. When you stop it to turn over, the system fails. This is however more likely to happen on a direct drive turntable, not a belt driven

...direct drive, and i think it maybe the magnet any suggestions on how i can fix it/if its fixable or whats caused it? Thanks. do both of your numarks make the same sound? what is the weird sound? The ...

direct drive. These usually have the problem of the rubber drive wheel gets hard and the turntable is slow. Just stopping is more likely a belt. It is possible the belt has simply come off and in that