Technics SL-BD22 Turntable "adjust tone arm" Questions

adjust tone arm I need to adjust the initial tone arm stopping area where the tone arm sets down to play the record. The tone arm sets down on the edge of the record and then falls off the record edge

...adjust the downward force by adjusting the counter weight which is on the back of the tone arm. Rotate it so it's closer to the tone arm fulcrum to increase the weight on the arm, like tightening a ...

...tone arm from returning too early on smaller records? I am playing a record that is slightly smaller than the standard 33.3 record (not quite a 45). However, the tone arm is returning to rest about ...

tone arm does not trigger auto shut off At the end of play, the tone arm moves a small piece into the revolving gear that operates the shutoff process. If the tone arm remains in the completely played

tone arm, it plays fine. Is there an adjustment I can make??? Marilyn http://www.crosleyradio.com/Manuals/CR248_Manual.pdf I didn't see the tone arm balance adjustment in the user manual, however that

...tone arm ejects before reaching the end of a record You need to get a service manual for the turntable and see how to adjust the tonearm. Sometimes there is a screw that needs to be adjusted by the ...

...tone arm reaches the center. How can I adjust for this? Thank you for any response to this. There should be a set screw that you can tighten in order to adjust the height return. If you do not have ...

...Tone Arm Skating There is no tone arm adjustment, I just got it today and it played like a charm. Tried it again just now and the tone arm just skates to the centre and will not play any record. All ...

tone arm. When a tone arm skips, it's usually because there's too much counter weight on the rear of the tone arm. You want between 3-5 grams, but first you have to calibrate your tone arm (balance it