...a FO/ F09 warning F9 is a water pump problem, either clogged pump, or pump malfunctioning, Check for something clogging the water pump also there may be water and air stuck in the pressure switch ...
...tip unit back and on right side of drum you will find a hose connected to it remove this hose and inspect it for clog,if no clog is found nipple end on drum is probably clogged"can be cleared with ...
...pressure switch. Manualy blowing the switch is fine. However, still works intermittently. Is it the switch or is it possible there is a clog below the hose in the tub? if you can find the machines ...
pressure switch hose clogged F21 Long drain Possible cause: Clogged filter, clogged/failed pump F22 Door lock error Failed lock. corrosion,or broken wires. F23 Heater Failure Bad heater F24 Water temp
...pressure switch , clogged drain, kinked drain hose ,. defective water pump , defective water tempeerture switch, damaged water valve solenoid , water inlet valve has an interal malfunction I checked ...
...pressure to the tap or house is too low. Other possible causes are kinked, pinched or bent water line hoses, or clogged water inlet filters. TIP Make sure the water taps are fully open. Make sure the ...
Question about LG Washing Machines
...pressure to the tap or house is too low. Other possible causes are kinked, pinched or bent water line hoses, or clogged water inlet filters. TIP Make sure the water taps are fully open. Make sure the ...
...tip is in contact with water (or if a pressure issue exists within the drain). That water may be siphoned out of the hose resulting in this F20 error. Pull the hose out of the drain pipe and see if ...
...pressure to the tap or house is too low. Other possible causes are kinked, pinched or bent water line hoses, or clogged water inlet filters. TIP Make sure the water taps are fully open. Make sure the ...
579 questions posted
Usually answered in minutes!
992 Questions
874 Questions
371 Questions
323 Questions
255 Questions
