...from my turntable? You only change the needle on this unit not the cartridge. Needle is about 16$ if you need any other assistance please let me know. Thanks, ...
how to rewire a thorens tp 16 arm wand I believe I already answered this. Again, my website is audioserviceclinic.com. Thank you.
...in Mono. I had this problem before and had to change something with the stereo mix. Currently 16 bits 44100hz. Any sugestions? I solved the problem by using www.wiki.audacityteam.org home page ...
new drive motor for MMF-5 turntable Power supply for my MMF-5 turntable is 16 volts. Some idiot put 240 volts on it and burned out the motor. Where can I get a new motor and belt. Can I suggest you ...
...click the properties button,click on advanced tab, in the default format make sure that " 2 channel,16-bit,44100Hz (cd quality)" is selected, the incorrect default is for 1 channel. Hope this is of ...
Question about Audio Players & Recorders
...player is set to 12 inch records but when the needle drops it drops off the side of the record by 1/16 of an inch. What should i do? Lift up the tonearm. Underneath, you will find a set screw with a ...
Question about Marantz Audio Players & Recorders
...6025 turntable, there doesn't seem to be any way of releasing it, it moves slightly up and down (1/16") I have same problem - can't move platter at all - but need to replace ...
...4 ohm speakers and they blew, try fitting a pair of 8 ohm speakers. Or if they were 8 ohm, fit 16 ohm Doing this will reduce the output volume from the speakers, it it will also improve the
Question about Audio Players & Recorders
...Consider buying a used one off Ebay (currently there are 9 units available. One going as low as $16 +
...time, I do not see any free manuals for the TT510 but there is a service manual on eBay for under $16. This would show how to do basic operations plus more technical info that might be helpful if it ...
116 questions posted
Usually answered in minutes!
325 Questions
254 Questions
185 Questions
116 Questions
97 Questions