Pioneer CDJ-800 Turntable "replace fuse" Questions

...fuse and gently snap it back in to the silver holders. 8. Replace the clear plastic circuit board cover. 9. Screw back the the circular plastic cover (Note: 5 screws holding it down) 10. Replace the ...

...I can't see why. Any ideas? Cheers Dunk this was happening last mine with mine aswell i just replaced a fuse then it started to work??One fuse had colouring on it which i did not know what it ...

...sure The fuse is located on the rear of the unit. Remove it and take it to an electronics shop for replacement. If it does not work, then you've fried the transformer and will need to have it ...

they wont turn on i have them plugged in but no power is going through either of them Check the fuses. If the fuses are good, then it's the transformer that is shot. The fuses are located underneath ...

...fuse are burn, and changed, when i turn it on keep burning the fuses, can i get some help on this problem.? is a GLI PRO rcx-5000u hybrid preamplifier---. 2000watt You shorted the main semicondutors ...

...replace all the fuses? internal fuse and plug fuse? [email protected] is my email thanks! have you switched the voltage switch over underneath the turntable plate One of my turntables target light was ...

...fuse that can blow? If so is it easy to replace myself? while replacing the stylus lamp, I saw a little spark, and now have the same problem, nothing works. I have a U.S. model (M) from about 1995, ...

...fuse? Can I do it myself or should I take it to a shop? Thanks... Jo The fuses for this model are located underneath the turntable platter. You can replace this yourself, however, please be sure to ...

...fuse and both the internal fuses from my other deck but the deck does not turn on or play still. Problem is not the fuses, but the power supply / power transformer has blown. This is why you should ...

...replace a fuse on a pro-ject turntable I have a question, who says which it's the fuse, since i've written the psu and the motor of your table and or it's placed it the motor or psu, but i can't find ...