Brother XL-2600I "sewing machine stitch length knob" Questions

...stitch length knob and stitch width knobs to zero, (always set them to zero first to avoid wear on the stitch selection mechanisim) then turn the left stitch selector knob to the blue button hole ...

...sewing machine. I was able to remove the frozen stitch length regulator on the sierra nelco sewing machine. It is moving freely now, but now I can't reinstall it. To reinstall the stitch length ...

...sewing machine... Can anyone tell me how to change the stitches on the White 1418? I need to make button holes and I have no idea how to get it to the proper setting. I think it is number 5, but do I ...

...sewing machine. A transcript from the Elna SU manual reads as follows, and the manual can be viewed on line at http://sewingonline.co.uk/instructions/elnasp/ First make a few trial runs with a scrap ...

sewing machine, model # 5186 because my machine was on the fritz. I got it already to use, put the bottom knob on S for straight stitch and the stitch length knob WOULD turn, but not adjust the stitch

...sewing button stuck HELP!! Model 6430 Viking has the reverse button located in the center of the stitch length dial. It is firmly jammed in the reverse position causing the machine to sew ONLY in ...

...sewing machine. I have no idea how to turn the stitch selector knob. I have tried with a cam and without a cam installed. I have tried setting the length and width to 0. I have tried pushing on the ...

...my Consew 255rb-3. What is the part number and where can I find one? Thank you. Lorraine This machine doesn't use a knob, there's a button to push which engages the stitch regulator under the

...stitch length won't go below 2.5. Knob gets stuck. How to make stitch length lower? SLIGHTLY unscrew the large screw in the center of the stitch length knob, turn the knob to the right several clicks ...