Mitsubishi Diamond WD-65831 65" Projection HDTV "reset lamp timer 73" Questions

...reset the timer. If your lamp is more than 2 years old, it is suspect of failure. Be sure you buy a lamp with an Osram brand or Philips brand bulb inside. Any compatible(knockoff)lamps will not ...

...reset lamp timer on Mitsubishi DLP TV? My TV will not come on now after lamp replacemnent. I cant find the solution to reset my lamp hours, I replaced it, unplugged the tv like i was supposed to to. ...

Keeps shutting off First try to check the bulb if not broken if broken or damage try to replace it, after you replace the bulb you should reset the lamp timer. Good day and best regards.

reset the lamp hour meter, unplug your unit to the main AC outlet, then plug it again, then turn on projectors main switch. Hold down the two arrow buttons and the Power button on the control panel at

...lamp light is flashing yellow/orange. I tried unplugging for over an over, hit the reset button but after this the timer light flashes green for a little bit and stops then the lamp light starts ...

...Reset 32 Lamp Cover open 33 Air Filter Cover open 34 Lamp abnormality 35 Chassis Fan failure 36 Exhaust (Back Cover) or Lamp Ballast Fan failure 37 Engine (DMD or Lamp) Fan failure 38 Excess Lamp ...