Pioneer DVR-112D DVD RW Dual Layer Burner "jumper settings" Questions

...plug from the computer mainboard to the drive ? is the IDE Cable correctly fitted ? did you set the jumper connector on the rear of the drive to Master Or Slave ? if you are sharing the cable with a ...

system does not detect drive Is this a primary or a secondary drive. Is the jumper set as a master? If you have more than one drive is one set as a master and one set as a slave? What type of system ...

dvd burner my new computer will not read my dvd burner I took out of my old computer i want dvd burner did you check the jumper settings on the dvd player.?

...- slave, CS - cable select, these three are main connection for IDE designation using the plastic jumper, just follow where it is in your

take the side panel of, check the cables are in correctly, also check the drive is set to the right jumper setting usually master. Also check in the bios to see if you have raid capabilities, it would

New DVD/CD Writer is not recognized I removed the CD drive and replaced with a Pioneer DVD/CD wirter, but the new drive is not recognized at all. At set up, the HD is primary master, and under ...

...THAT THE PROBLEM LIES WITH THE OPERATING SYSTEM WHICH IS WINDOWS XP MEDIA CENTRE. ANY HELP ON THIS ISSUE WILL BE WELCOME did you adjust the jumper settings for corresponding master or slave

Samsung TS-H492 Jumper I've been given a DVD-RW by a friend to replace a faulty one. I can put a DVD in the drive but Windows XP doesn't see it. I presume the jumpers on the back aren't set right. My ...

How do you set a LG GSA-H10A DVD Drive as a Slave? Which of the three jumpers is the Slave Jumper? Closes to Data Cable or Middle jumper or closes to Audio Socket? Hi, on the drive there will be ...

...jumper settings, if hard drive is set as Master, the DVD writer it should be as Slave, if the hard disk jumper is set to Cable Select (CS), the DVD should be in the same way too. After this check if ...