Sony PS-LX250H Turntable "start stop" Questions

Start / Stop button does nothing. Strobe still works, it's in mint condition and has had little use but suspect the kids have been messing with it. I have the same problem as mentioned above, does

...start/stop buttons where powered by a mixer and will either need to be reconnected this way or reconfigured is this a problem?? who ever told you that is a ****, start n stop are tied into the power ...

...start/stop switch inside the turnable is broken and is fixed in the on position. Or the leaver mechanism has become detached from the arm when the record was playing and left the other part pressing ...

start/stop switch pcb, can anyone confirm this? You can indeed parallel it between start/stop button, or buy the unit for 50 euro :) or just read this page http://siber-sonic.com/broadcast/SL1200logic

...Stop/start light flashes red instead of staying solid I unplugged the power supply for more than 24 hours. Whenever I plug in the turntable, the stop/start button flashes red on and off (the red ...

...do to the 1200 to make it spin in reverse with a double-tap on the start / stop switch - exactly as you're describing. Likely, the previous owner installed said mod. It's awesome, embrace

...start/stop loop My Pioneer full automatic turntable PL443 starts and stops in an endless loop after pressing the start button. Is has not been used for years, now i would like to reactivate it. It ...

...start but half way into a record it stops spinning; please advise it starts and plays fine - but about halfway into a song the record will stop spinning. if i tap the turntable it sometimes starts ...

start/stop button doesn't move platter I have Numark TT1's and the start/stop button doesn't move platter nakered switch then needs replacing CHECK TO SEE IF THE SCREWS HOLDING THE PLATTER TO THE ...