Sony PS-LX250H Turntable "adjusting speed" Questions

my deck plays too fast and i must adjust pitch control to -2.5 to get the speed correct... is there a way to adjust speed internally? this is calibrated from factory, the control board is faling check

YAMAHA P-220 VINYL RECORDTURNTABLE SPEED PROBLEMS:- HOW CAN I YAMAHA P-220 TURNTABLE SPEED PROBLEMS:- HOW CAN I ADJUST THE TURNTABLE SPEED ? THE RECORDS SPIN OVER-SPEED SLIGHTLY if you open the bottom

adjusting the SW screw on the underside of the unit that apparently fine-tune adjusts speed. It fixed the speed on my turntable - more info/instructions on it are posted under Mocamom1's question &

technic SL5200 turntable speed is to fast on 33/45 1. Some of these turntables were designed to work on multiple voltages. If yours has a voltage adjustment make sure it's set for 110 or 120 V (North ...

adjust pitch not working on PS T1 Sony direct drive. Pitch adjustment knob all the way to one side, slowing the turntable speed as much as possible, still not enough. how do I adjust further, is there

HOW TO ADJUST ROTATION ON DIRECT DRIVE JVC TURNTABLE If you're talking about the speed of the platter, there will be a pitch control knob to increase to decrease the speed. If the adjustment still ...

I have just bought a pre-owned Technics SL BD-22 turntable and the speed is variable - when I adjust the pitch adjustment wheel it seems to get worse. On listening to familiar music it seems to be ...

...got to by removing the bottom of the turntable. Others have it built into the motor itself. You should replace the belt first if the speed is slow on both 45 and 33, before adjusting the motor

How do you adjust the speed of a Memorex 2601M? How do you adjust the speed of a Memorex 2601M turntable? Spins a little too fast at 33, 45 & 78. Is there a way to fine tune the speed? Go inside ...

THE SPEED SEEMS TO BE A LITTLE SLOW On most turn tables there is a knob or a lever to adjust rotational speed. If it does not seem to have one then the motor is most likely out of sync and would need ...