ION Audio iTTUSB Turntable "skate 3" Questions

...and tone arm hight on my turntables what are the proper specs, thanks. Anti skate should be set the same as the weight, i.e 3 gram of weight = 3 on the anti skate. ...

...3 Anti-skate control set to low. First check the stylus you should feel it sticking in you finger a bit. 2 Has the weight on the end of the arm become lose? Adjust for the correct tracking weight of ...

...3 grams. If the weight has numbers on it these will match the grams. There's no right setting for the skate. Should the stylus start to skate accross the record increase the force. Start low! On the ...

3 which are usually average you should be able by the difference in sounds frequencies, which weight pressure sounds the best. After this set the anti-skate corresponding to the weight of the tonearm.

This is a question for my daughter who lives in Japan. She has a Crosley turntable she bought from Urban Outfitters. The stylus arm has suddenly started skating over the record, ie won't play anything

3 and 5 grams. Set the anti‐skate dial to coincide with the tracking force... in other words, if the tracking force is 2 grams, set the anti‐skate dial to "2". The exception is for

...3 grams is average. Then rotate anti skate to be equal. That should get you there. If you still have adjustment related distortion then it may be time for a new needle. NOTE: Anti skate is adjusting ...

...3 songs -with the needle still on the record take the arm as far forward as you can, then back as far as you can, so it clicks, then un plug the power lead & switch the unit on to drain the power ...

...3 grams should be sufficient. Don't make it too heavy...use as light a weight as will play and track record properly. After you have set the weight, set the anti-skate knob (or counterweight) to the ...

...turn knob with numbers up slowly bit by bit, trying a record each time till it stops but doesn't "rumble". 3. Adjust anti-skate control if it's got one. Again bit by bit, testing with