Technics SL-1200MK2 Turntable "replacement rca cables" Questions

...rca output cord is cut...do they sell a replacement? Finding replacement parts for anything but technics seems to be difficult. However, if your familiar with soldering or have a friend who can, if ...

How do I replace the RCA Cable for my turntable. How do I open the turntable base to replace the RCA Cable on my 1245? I have replaced connectors several times, and continue to have one channel or the

...replacement is not recommended, unless you have soldering skills. Question, did you replace the RCA cables direct from the board - unsoldering the old ones, and soldering on the new ones? Or did you ...

...RCA Cables 3) Cartridge/Styli I generally tell people to try different cartridges first. If that doesn't work, then you know it's either your tonearm or your RCA cables. 80% of the time, it's the RCA ...

...RCA cables. You can use any regular pair of RCA cables. Cut them and strip out enough wire to solder them on. If you don't want to do that, then you can have it done at the shop and they usually just ...

lame rca rca is only producing sound from one side(with a jiggle it makes a bad earth sound on the "missing" side)bvvvvvvvvvvvvvvvvvvvvv You have a bad rca that tends to happen after time ... your ...

...RCA cables, or it could be a tonearm or cartridge issue. First try and swap out the cartridges on your turntable, and see if the problem persist. If it does, then you can narrow it down tot the ...

i have sl-1200mk2, and the signal does not come in as strongly through the red RCA cable. I popped it open and the red rca contact point does look a bit let like one big secure blob. what should i do?

...RCA cable, can I buy a replacement electronic plate or is it repairable the small copper plate? thanks for help Mat I've used an 'RF isolator' or 'ground loop isolator' to remove hiss Its essentially ...

...RCA cables on your turntable. You can try to do this yourself, however soldering experience is required. You can purchase the parts HERE - and install yourself, or try to find a reputable service ...