...direct drive system instead of belt drive (two types). If this unit has been in storage for some time, it has most likely been at hot or cold tempuratures - not good for any electronic/mechanical ...
Question about Numark Audio Players & Recorders
...first off if its direct drive chect that the motor is not faulty if its belt driven make sure the belt is still on im guessing its direct ...
...direct drive.....I'd just let it run for an hour or so and see if it speeds up. If not, and it's valuable, take it to a repair shop. If it's cheap....scrap it! Is the turntable a belt drive or direct ...
Question about Audio Players & Recorders
...direct drive or belt turntable. If it is a direct drive then clearly there is something wrong with the drive circuit that controls the 45 speed. A belt drive model is more problematic, though a two ...
...direct drive and is running slow Most of the 'direct drive' turntables have a "pitch control" dial - you turn this dial until the black bars 'stop dancing' and hold still. There should be a little ...
Question about Technics Audio Players & Recorders
...Direct Drive Turntable? If so, then there is a major problem with the drive system. This can only be diagnosed and repaired by a qualified technician. If your turntable is not the Techics SL1200MK2, ...
...direct drive turntable. If it's a belt then something might have caused the belt to slip off it's normal position so it runs fast. Direct drives are more complicated, but it would seem that the ...
Question about Drive Audio Players & Recorders
...direct drive record player on my Electro Brand Retro Cd Am/fm With Turntable 45rpm, 78rpm, Built - In Speakers Model 9263, I dont have the manual and can not find it online. record player will not ...
Question about Technics Audio Players & Recorders
I need the manual for a technics sl-6 direct drive turntable Technics SL 6 Manual Direct Drive Fully Automatic Turntable System Vinyl... Cheers john. Stylus City
...direct drive. if its belt try replacing the belt if its direct drive and your hearing it turn on and the platter doesnt budge when you press start the motors blown. I hope This helps, by a Stanton ...
276 questions posted
Usually answered in minutes!
325 Questions
185 Questions
116 Questions
103 Questions
97 Questions