Technics SL-DZ1200 Turntable "motor replacement" Questions

...and can sometimes dry out with use and somewhat seize up causing what may sound like a rattle. If the motor shaft has worn down enough at the bearing point, then a rebuild or replacement is in

thorens motor bad motor on a td 126 mkii what are my options ? Replace it. Your belt has a 1/2 twist in it. Pull the rubber mat, rotate the motor pulley through the platter holes, and look for the ...

Motor replacement I need to know if a motor from a Thorens TD145/160 will work in a TD125 mkII. Can you help me with this? If the motor can physically fit where the replacement motor use to be, then ...

thorens motor need to rebuild or replace the motor on a 126 mkii what are my options ? From what I've seen on the web a motor for your model costs around $400. Personally I would buy a new turntable. ...

...the belt is removed from it. Any help would be appreciated. Thanks the may be a 'dead spot' on the motor, try to jump start it by spinning it with your fingers several times. it's a longshot but it ...

I just changed the drive belt. Immediately following that, the motor is intermittent; it has worked a bit, but also cuts out for no apparent reason. Once it cuts out--happened twice--I cannot get it ...

technics 1200 The platter on my 1200 lacks alot of torque. I suspect the motor may be worn as it is an old turntable. Are there any other possible reasons?. Also I have looked into motor replacements ...

replacement. Before installing the belt, the motor spun and couldn't be stopped, not even the stop button worked (probably faulty wiring). However, now that I've installed the new belt, the motor wont

...the belt can become too loose with age and stretch and may need to be replaced. Additionally, the motors that turn the table via the belt can become worn out and sometimes can be revived if you

Loss of turntable speed - is it the motor and can it be replaced? Platter still rotates but belt struggles to turn it - capstan appears to be loose. Yo wil need to check your belt tension and if it is