Sony KDS-60A2000 60" HDTV "replace lamp ballast" Questions

Ballast is what turns Lamp on, Also Check your Lamp Fan if it is defective Lamp will not Light! I would check all the electrolytic caps in the P/S. The ballast is trying to ignite the lamp but needs a

...replace lamp first. If problem would not go away - then next step is to check and replace ballast. It have to be done by skillful technician who suppose to check +5V trigger voltage supplied to the ...

...lamp for your ballast. Samsungs are very critical that the lamp be matched to the ballast, often replacement lamp dealers dont take that into consideration when substituting samsung lamp numbers. Was ...

...replace lamp and see tv works or not. This tv has self diagnostic feature, turn On tv and let it shut down, now check standby light that would be blinking in specific order, for example 3 or 4 times ...

lamp, the ballast needs to send some High Pulses of Voltage, as high as 15 kV (that is the constant clicking sound that you are hearing). In order to resolve this you need to change the Ballast Board.

...replace the lamp power board or call a technician. You can find parts here. I am a panasonic tech - yes most probably the lamp OR the ballast OR the thermal fuse unit on top of the lamp house. Change ...

...causing the issue. Samsung is well aware and will replace both the ballast and the lamp (since the lamp can be prematurely aged but the bad ballast). After replacment most people stop having

...replace the lamp the two wire plug it connects to goes direct to the Ballast.The spark plug type wires are there for a good reason--lots of rf there.Double check lamp went in correctly and mated with ...

...Replace the lamp ballast board first. Because, it there is any internal winding short in the inverter transformar of the ballast board this type of fault can occur. you have to replace the ballast ...