Question about Sears LiftMaster Building Materials
...wall button operates the door just fine. The remotes will operate the second operator. The door bell style wall push button is flashing rapidly and the remote controls will not operate the door. Both ...
Question about Sears LiftMaster Building Materials
...Wall button still works. Thanks Adrian Did you program the opener after replacing the logic board? Press and hold the button on the remote while you press and immediately release the smart/learn ...
Question about Sears LiftMaster Building Materials
...have failed. The wall button works without the receiver; I would remove the logic board and look for loose or missing traces on the printed circuit board. door went up and will not go down with ...
Question about Sears LiftMaster Building Materials
...operates from the wall mounted button. There are two remotes and neither will open the door. The green light on the WALL button is blinking. There is nothing that looks like a Lock Button (suggested ...
...wall button. If the wire is smashed the insulation becomes so thin that power will leak thru the insulation and activate the door or interfere with the remote signal. Loosen the staples with a small ...
Question about Sears LiftMaster Building Materials
...WALL BUTTON MAY BE REVERSED. try holding in the lock button for 3-4 seconds 2 most common issues with the wall station are wires being reversed or touching. Try reversing the connection on the wall ...
Question about Sears LiftMaster Building Materials
wall button has a green light that is blinking and the car remote will not operate the garage door but the wall button works this just happened to us today as well. the wall pad has three buttons: one
...wall button, inside the garage/hardwired, works to operate the door, but the other two methods do not. I did put in a new battery. Hopefully that info will help you assess my problem. Thank you, Dave ...
Question about Sears LiftMaster Building Materials
...wall button or remote(s) 2) Door closes fine from remotes 3) Press and release the wall button, it starts down, and then stops and backs up like something is blocking the sensors. Sensor lights are ...
wall button or a smashed wire. Anytime a door opens and/or closes by itself, or remotes work intermitantly I look for a smashed wire between the motor unit and the wall button or a bad wall button. If
5,971 questions posted
Usually answered in minutes!
0 Questions