Question about Sears LiftMaster Building Materials
...keep pressing the button inside the garage and holding it until it touches the ground. No closing is happening when you are outside the garage pressing or holding the remote in the car. Also you got ...
...close, jerks to a stop, then we have to press and hole the button and it closes. Hi, it is probably the safety photo beams out of alignment or not working, when this happens the garage opener goes ...
keep it pressed down in order to close the garage completely. The same applies for the keyless entry. I have to keep the button pressed down in order to shut the garage door. Align sensors or replace,
Question about Sears LiftMaster Building Materials
button to close the door completely. Press and hold the button from the wireless remote control won't do the work as the wall-control-button. Along with that, the light bulb in the unit keeps being on
...close the door but you have to keep on pressing the button? What should I do? If the main light flashes 10 times when the door reverses to the open position it is a door sensor problem. Make sure the ...
...close unless I keep the wall button pressed. I notice the two photo eye at the bottom of garage door. One of the eye/receptor is off. The other has the green light but one does not. Do I have replace ...
Question about Sears LiftMaster Building Materials
...button had to be pressed once to stop it). I tried adjusting the raise and lower screws and got the lower (close) direction perfect but it still overdrives opening until it hits the opener itself, ...
Question about Sears LiftMaster Building Materials
...when it is close to the unit the remote will open the door from the road but i have to keep pressing the button and get close to the unit in order to get it to close Check the sensors in the
...close I have to keep keypad button pressed till door closes completely. Check your door sensors. Make sure they are pointed at one another and the small light on each one is lit and not flickering. ...
...keep the button pressed*, or the key turned until the door is *completely closed*. Otherwise it just pops right back up. The motor unit/box makes a click when I try to close using the remote closer.- ...
5,971 questions posted
Usually answered in minutes!
0 Questions
