...coming out of the capacitor. Get the MFD (microfarad) number range off the capacitor and the voltage (usually 220 volts, possiblye 330.) and find a replacement capacitor for the brand of your
checking a capacitor on a liftmaster If the capacitor is bad the motor will not run and you will have a loud hum when you try to use your opener. What is the symptom you are having?
Question about Sears LiftMaster Building Materials
Door always opens, intermittant stopping when the door is closing. Sometimes it closes all the way, other times it stops repeatedly and you must press the close button many times to get the door to ...
Question about Sears LiftMaster Building Materials
...opener. It works intermitenly. Some times the motor just hums and does not open. If I pull up on the door gently it starts and opens and will then open and close ok for a while then hum again and do ...
Question about Sears LiftMaster Building Materials
bucks, and this may not be the exact problem. It may be that the motor windings have shorted. You have a choice of replacing the whole door opener for 150 bucks or try replacing the starting capacitor
...opener bought in 1992 has stopped working, The motor hums when the remote or wall button is pressed but the door will not move at all. Please help Most common cause of the problem you describe is a ...
Question about Sears LiftMaster Building Materials
...capacitor your asking about it the run/start cap for the opener motor . to change this cap you will need to unplug that door opener from the 120 volt source . then take your light cover off of the ...
...the capacitor in an opener. What brought you to do that? Oh wait, there was an old as heck opener that had a cap that spit out stuff if you used the opener more than once. How old is the
Question about Sears LiftMaster Building Materials
...nothing else happens. The track dosen't move. I have had same problem. Replacing the motor start capacitor fixed it. Capacitors can go bad in an instant when they get old, particularly if they are ...
Question about Sears LiftMaster Building Materials
...opener and messed the wires up on the two capacitors. I need to know what wires go to each capacitor so I can make usre i have it connected properly How about a make and model number? Are there 2 ...
5,971 questions posted
Usually answered in minutes!
0 Questions