Dewalt 18 Volt Compact Drill Kit "works reverse" Questions

My reversible power drill can only work in anti clock direction My reversible power drill works well until the last Sunday. When I drill a piece of wood in clock wise direction, I apply some force ...

...does not work in reverse What part do I need to replace in my dewalt 18 volt dw959 drill to make it work in reverse? It works fine going foreward. All other aspects of the drill are fine too!! Bob ...

The motor turns but the clutch will not engage Dewalt 925 xrp 18 volt hammer drill. I was drilling; the bit was hung up so I reversed the drill and the clutch (?) will not engage. Take the drill out ...

switch for forward and reverse only opperates in makita 14.4 cordless drill.only works in reverse your transmission has gone out

my 14.4 drill wont reverse directions does it have a reverse swtich if it has the worn gear may be worn out

works fine in forward but will not go in reverse Hilti SF 121-A battery drill. the drill was working both in forward and reverse but now will only operate in the forward rotation. Assuming that it's ...

the drill gun does not reverse The reversing lever(13) may have popped out of the reversing lever on the switch, but more likely the switch is bad: The Switch part number is 23-66-0690 and costs about

My lithium 20 volt drill is not working. the chuck is will not open and close. you cannot move the front and back sections independently so you cannot tighten a drill bit. How can I loosen the two ...

...works fine. The back to reverse and for the first trigger pull it will stay in forward. I release and pull trigger again and if will go into reverse mode. What is causing this. It has happened since ...

...reverse works fine but when in forward it will work for a few seconds then stop and keeps doing that. why? I'd be looking for a defective forward/reverse switch, or a bad connection/wire on the ...