...roller that is worn so it doesnt grip the paper. I had this and the paper would feed in then stop just as it was exiting the top of the printer. If it doesnt get this far but is just stopping at ...
...vacuum cleaner stuck it back no more jams. It is less a jam than the thing just getting an error from the waste toner. The other thing could be the paper feed roller. There is a rubber on this that ...
Question about Minolta Office Equipment & Supplies
VACUUM CLEANER TO CLEAN TONER STATIC ELECTRICTY CAN DESTROY THE SENSOR UNDER the Image unit. Try this site and get new image unit if available you have legacy Minolta machine. Precision Roller Printer
Question about Minolta Office Equipment & Supplies
...roller unit.If the lines appaire on the surface the transfer belt clean the belt cleaning blade and the cleaning brush used a vacuum cleaner.Clean used a special long tools under every image unit LED ...
...starts the climb up to the PC unit but it stops after about 1.5 inches. No obstructions or paper damage evident. There is a sensor there, and I have checked it as best I can and vacuumed it in case ...
...roller is coated with teflon so the toner won't stick to it while it's heating the paper. After a period of time/number of pages (usually 100,000+), the teflon wears out and the toner starts sticking ...
...it's back - so are in effect pushing the card downwards. Work the card in and out. If you have a vacuum cleaner with a narrow nozzle, you can place this into the other side where the paper would ...
...roller wheel. It breakes a LED switch light parth, if this was open circuit, or not moving, could it give a E3 jam error? If the soldered connections on this small PCB were dodgy, resoldering them ...
1,096 questions posted
Usually answered in minutes!
374 Questions
221 Questions
108 Questions
110 Questions
74 Questions
