...THE TV. Replacing a backlight controller is a job for qualified electronics engineers only. The backlight controller generates high voltages and is dangerous. Take your TV to a reputable TV
...HIGH VOLTAGE circuits inside your tv that could inflict serious harm even when its unplugged if approached wrong. There should be warning stickers all over the chassis of the tv informing you of the ...
...TV" 1. Check power cable. 2. Check fuse. 3. Check the power supply section. You can check the secondary output voltages to confirm the power supply status. 4. Check the inverter circuit. These are ...
...VS adjustment potentiometer. adjust the voltage down at least 10 volts, if your not an experienced person in electronics, get a person that is, there is a high voltage on that board that is ...
...TV it keeps cycling like it is trying to start. It seems to shut off and on clicking for about 10 cycles before it comes on Could simply be dust or a bad circuitboard. Needs service (dangerous high ...
Question about Televison & Video
...was working fine last night. This morning, you can hear it click to turn on, but no led light or tv will turn on High voltage circuit are dangerous. Use caution. You can seriously injure ...
...high voltage danger and possible damage to the tv if you are not very experienced with this repair. A technician can however read the voltages and adjust them to specifications and this will get rid ...
Question about Televison & Video
...high percentage of the replacement TV cost. If you are willing to try, and can be CAREFUL, you can open it, clean out any accumulated dust/dirt (which can exacerbate overheating), possibly check ...
...causing extensive damage....it a safety feature. Shutdown circuits is used to prevent the high voltage from becoming dangerously high causing bodily injury or
436 questions posted
Usually answered in minutes!
2,254 Questions
610 Questions
478 Questions
330 Questions
245 Questions