Brother DCP 130C All-In-One InkJet Printer "factory settings" Questions

...installed the reset gear is set to IN USE. When a NEW toner is installed the reset gear is set to FACTORY

...printer back to factory settings. Then uninstall the printer and the software/drivers. Re-install them. If that doesn't work then it may be a technical issue with the processing unit of the

...navigation key to select LAN and press Set or Menu/Set. Press up or down navigation key to select Factory Reset and press Set or Menu/Set. Press 1 to select "Reset". Press 1 to select "Yes". The ...

...settings and then to factory defaults for it. make sure that the printer firmware is updated, you will need to connect it to a computer and need internet to update it from manufacturers website. if ...

...pop again..what was? the promble please help me.. the printer needs to be clean and restore the factory ...

...you. You can print all, but printing a selected page is impossible. try getting into menu and set factory ...

t ever go out. Time for a new unit? Cheers, Kirk/Australia Before you buy a new one try to reset to factory setting first. Sometimes it help

could i reset the drum life of dcp 7040. it is factory set for 12000 copies as per the manual If your drum is still good - take it out and put it back in - the trick is to LEAVE THE FRONT DOOR OPEN ...

...mode would be to reset all printer settings. There should be a reset menu that will allow you to reset the printer to factory defaults. After which it should recognize the new ram and print

...it for a couple of minutes and it should reset itself to factory default settings which might solve the problem. You will loose any settings and any work in progress. Just a guess. Good