Konica Minolta magicolor 2490MF Laser Printer "looking correct paper size" Questions

...page of document is always mis aligned starts printing 1/3 of the way down the page- but the print preview looks correct - In correct paper size check that you are using inch not metric paper ...

...paper size is correct (A4) and the paper size setting is A4. If I take the paper out of the feeder and replace it again the error message dissapears, it prints 1 page then the error message comes up ...

...paper size mismatch" or "put media:tray 1 A4" error. Maybe not important, but maybe good to know. Aditionally, I'm having problems printing color on it. In color modes (not monochrome, that seems to ...

...paper or size of paper being used removed any other paper currently in the printer before inserting the new paper.If your printer uses a slot or tray for the paper make sure to not push the paper too ...

...correct paper I believe you don't have the paper size slide on the front of the paper cassette correct. Look at the slide carefully because it also has the paper direction picture along with the ...

...I have been using The document you are trying to print is set to a different paper size than the printer has. It is looking for paper of the correct size to be installed so it can print the

...correct paper size as the paper in the paper tray.. LTR size set to LTR or LTR-R set to LTR-R if the dial is set to the wrong size the copier will jam all the time. Due to a timing issue, the copier ...

...correct as far as paper size is concerned, also picking a tray vrs. auto paper select should help. -Carl Make sure the paper trays are set to the right size. Press the Copy function key on the copier ...

...paper sizes that corresponds with your printer either (lettter size or 8 1/2 x 11) if this is not set correctly then you can get skewed on your prints, if i understand you correctly, or kindly ...

...correct paper size? Is it set up in the paper tray as LTR, but the tray is saying LTR-R on the display. If so just change the paper size knob to the correct size. Also, if it stops in the same spot ...