Canon PIXMA mini260 InkJet Photo Printer "feeding cover open" Questions

cover, put your documents in the feeder and start your scan. Use your fingers to fiddle with the gears while the ADF motor is running and trying to feed documents. I'm not sure if I flicked the little

...cover. Power the printer on and confirm that the printer operates normally. Note: If you cannot remove the foreign material in the above procedure, the printer may require servicing. And Clean The ...

The paper won't feed right. Goes in on the right side but the other side won't feed. open the covers and check for a paper piece jammed in the path. also look at the little rubber paper drive rollers ...

...feeding in at all. A foreign object could also cause the paper to stall, or even feed-in crooked. Remove all the paper and use a flashlight to look carefully into the paper feed-in area. Look for a ...

...Cover, the paper is jammed, clear the paper and press OK. It works relatively OK from the rear feed. Based on your description of what's happening, especially the part about the paper sometimes ...

...Open the sheet feeder cover and pull out the paper support. <2> Set paper, aligning the right edge of the paper to the cover guide with the paper's print side facing up. <3> Pinch and ...

...feeding the paper through? any help??? Try these solution : 1. Turn the printer off and open the access cover. 2. Look for any obstructions in the paper path and remove them if necessary. (It is ...

...open the access cover. 2. Look for any obstructions in the paper path and remove them if necessary. (It is possible to move the carrier assembly with the power off.) 3. Turn the printer on, load some ...

...cover open, close inner cover" which is how the cd tray fits in. If I close it then the cd tray will not feed. I am under a deadline, a super quick answer would be fantastic. Sorry a little late only ...

...cover open,take letter sized paper, fold it in thirds or quarters, slide it into the paper feed at back of unit (normal paper feed direction) on the side that's obstructed and look in the unit to ...