...information can be found here Regards, Jacob On the K100D images are framed using a penta-mirror optical viewfinder. The LCD is used to review photos and display settings. The K100D does
...and manual and the f stop value never shows anywhere Pentax K10D shutter release won't function, mirror doesn't open, all else
...SLR cameras. When you look through the viewfinder you are looking at what the lens sees through a mirror/prism/lens system and the 'image' does not get to the capture device until you press the ...
...shutter. When I depress the button there is no action. If I remove the lens, then turn it on, the mirror moves and shutter triggers. Battery is fully charged. The lens is Pentax 18 - 250mm. Try ...
Maybe you can try sensor cleaning mode; Go to Menu>Set-up>Sensor cleaning, press right than choose "Mirror Up", wait a moment than power off the camera. Maybe this can help. Regards. -halotheracer
My Pentax K10D shoots the mirror at pushing any control/knob/button. But there are no photos taken. Photos were fine until the cmera started to shoot several time I took a shot. Shortly it went worse ...
...2-You have to search in the menues Setup/ Sensor Cleaning. This operation will lift and keep the mirror lifted so you can see the sensor. 3-With a blower just blow the sensor without touching it, ...
...the two areas is blurry, not defined. Check out this website http://www.lotek.nu/misc/EOS_300D_sub-mirror_repair/ I had the same problem. You can check to make for sure by removing your lens, and ...
SLR MIRROR NOT MOVING MUCH Any help would be greatly appriciated on canon rebel xt ... Mirror inside the assembly is only moving slightly when taking a picture. If I lock mirror for cleaning its still
...Has anyone encountered this before? 1) CF card in camera? Won't shoot without one2) Does mirror go up? 3) Canon had a run of bad motors for this model - if mirror does not go up, then it
5 questions posted
Usually answered in minutes!
89 Questions
22 Questions
16 Questions
16 Questions
16 Questions