HP Officejet Pro L7680 All-In-One Printer "not shut off" Questions

...off/on but I get SHUTTING dowm message for hours and it is not shutting I have hp printer model R45 I got scanner error and printer asked me to turn power off and on. I turn the power off/on. Its ...

...down - will not print menu window shows "shutting down...." but does not respond to anything. We cannot even turn printer off. Will not respond to any key. Help. (Plus we misplaced our

not shut down. The message on the screen say Shutting down. Of course it yells at me if I pull the plug. Which I have done, and it did not solve problem Driver could be corrupt. Disconnect the printer

...not do anything. Please help. try to shut it off and up it again... other solution.. clean the tab circuit of the printer where the cartridge is installed...and also clean the tab circuit of the ...

...shut off now it will not turn on. I did check the power adapter and the outlet. I did notice the adapter does not warm up at all. Not sure what happen the printer is 6mos old and have not had any ...

...shut off a lexmark s315 printer when the on/off button does not do it? HI, If your printer no/off button not working, contact printer hardware technician. Or short time you direct off the main board, ...

...not connected to a pc. my 7410 is continuously in a non responsive mode. Won't shut off without pulling plug. Plug back in and is still in this non responsive mode. It is not connected to a pc. ...

...not shut off. When I plug it in it will not shut off even when I hit the on/off button. The button stays lit until I pull the plug. Also, my computer is failing to find the printer. This should be ...

...not shut down or let me go on to another stage. I have pluggged and unplugged it. It still comes back to shutting down mode Hi Try resetting the printer, follow below steps Power Drain: Turn OFF the ...

...not shut down. I pressed the on/off button and held it down, but it will not shut down. It says it is shutting down, but that is as far as it goes. perform a reset on printer, it might be hung up. 1. ...