Question about Hotpoint Microwave Ovens
...stud in the wall.. One thing I have done is to cut the stud out and then to place a piece of 1/2" plywood in the area that the micro/hood will be located and attach that piece with drywall screws to ...
...venting from internal to external? I have an over the stove microwave/vent (whirlpool MH7130XEQ-2). It is currently set to vent into the room by pulling the air in on the bottom of the unit and ...
...hook in rear. Then you will see the mount plate on the wall. It should have screws securing it to the wall on stud locations. remove these screws and remove the wall plate. Hope this helps. Good
Question about Whirlpool Microwave Ovens
stud I can use to mount the Microwave to the wall and it's smack in the middle of the cabinets. Will it be ok to use toggle bolts for the corners and one wood screw in the middle to mount the bracket?
Question about Panasonic Microwave Ovens
...venting? Hi, It can be but not recommended. When mounting over the stove, counter microwave ovens they also include a wall support brackt that is fastened to the wall studs. After it is mounted ...
...stud on the outside wall ( a bearing wall) that wil need to be cut..I've installed many of these to outside vents and it is a lot of work.. so you may want to consider your options. If you hire ...
...venting this back into the room ( that's the easiest ) and move on.. The wall mount bracket supports the back bottom of the microwave oven when you secure it and the two long screws will be used to ...
Question about Kenmore Microwave Ovens
ge spacemaker installed over stove-----need to remove it how do i get it down? where are the brackets? how was it put up? please help... Her is a link that I hope with work that shows the bracket and ...
stud? When you say "outside vent" do you mean horizontally through an outside wall? If that is what you are trying to do having the 2x4 in the way does not make much of a deterrent. But if
wall stud being directly in the middle where the top vent of the microwave is. So to connect the microwave top vent (cant use the back vent option) to the 3.5" x 10" house-vent, I have to use an elbow
334 questions posted
Usually answered in minutes!
122 Questions
129 Questions
91 Questions
99 Questions
58 Questions